Test IKEv2.EN.I.1.1.6.5: Sending Multiple Transforms for CHILD_SA
Part B: Multiple Integrity Algorithms (ADVANCED)
To verify an IKEv2 device properly transmits IKE_AUTH request with multiple transforms
for CHILD_SA.
* [RFC 4306] - Sections 2.7 and 3.3
* Network Topology
Connect the devices according to the Common Topology.
* Configuration
In each part, configure the devices according to the following configuration.
|
IKE_AUTH exchanges Algorithms |
| Encryption |
Integrity |
ESN |
| Part B |
ENCR_3DES |
AUTH_HMAC_SHA1_96
AUTH_AES_XCBC_96 |
NoESN |
* Pre-Sequence and Cleanup Sequence
IKEv2 on the NUT is disabled after each part.
NUT TN1
(End-Node) (End-Node)
| |
|------------------->| IKE_SA_INIT request (HDR, SAi1, KEi, Ni)
| | (Judgement #1)
|<-------------------| IKE_SA_INIT Response (HDR, SAr1, KEr, Nr)
| | (Packet #1)
| |
|------------------->| IKE_AUTH request (HDR, SK {IDi, AUTH, N, SAi2, TSi, TSr})
| | (Judgement #2)
| |
V V
N: USE_TRANSPORT_MODE
| Packet #1 |
See Common Packet #2 |
Part B: Multiple Integrity Algorithms (ADVANCED)
5. NUT starts to negotiate with TN1 by sending IKE_SA_INIT request including a SA payload
as described above to the TN1.
6. Observe the messages transmitted on Link A.
7. NUT transmits an IKE_AUTH request including a SA payload as described above to the
TN1.
8. Observe the messages transmitted on Link A.
Part B
Step 6: Judgment #1
The NUT transmits an IKE_SA_INIT request including "ENCR_3DES",
"PRF_HMAC_SHA1", "AUTH_HMAC_SHA1_96" and "D-H group 2" as proposed
algorithms.
Step 8: Judgment #2
The NUT transmits an IKE_AUTH request including "ENCR_3DES",
"AUTH_HMAC_SHA1_96", "AUTH_AES_XCBC_96" and "No Extended Sequence
Numbers" as proposed algorithms.
* None.